Wave + Marble Art Epoxy Resin Kit

EFFECTS THAT STAY SHARP FROM POUR TO CURE

Most art epoxies are built for long open times and forgiving pours, which works fine for beginners, but often leads to over-blending, muddy colors, and flat results when you are trying to make waves crest, marble patterns hold, or lacing effects stay defined. Wave + Marble Art Epoxy Resin is built differently. The higher-viscosity formula gives your effects the body they need to hold structure and keep colors and layers in place. 

At a 30 minute working time, this works better than thinner art resins to lock in your effects before over-movement sets in, so creative ideas come to life without worrying about colors bleeding into one another. Make the most of the working time by having your colors mixed, surface ready, and tools in hand before you combine the resin and hardener in a 1:1 ratio by volume.

CREATE EPOXY ART WITH TABLETOPS, PANELS, and MOLDS

Wave + Marble is a specialized resin, but it is not a one-trick formula. Beyond wave and marble epoxy art, it works as a high-gloss, durable surface coating for wood tabletops, bar tops, serving trays, and decorative panels where visual impact matters as much as protection. It also handles small silicone mold castings for pendants, cabochons, and small functional art pieces. Apply a thin seal coat first on porous surfaces, then flood coat up to 1/8" per layer. Recoat in 4-8 hours without sanding for layered depth builds all in the same session.

WORKS WITH YOUR FAVORITE PIGMENTS AND TECHNIQUES

After you mix the resin and hardener, separate into smaller containers and add alcohol inks, mica powder, or pigment dispersions before pouring. Pour directly into your mold or apply with brushes and plastic spreaders. Let the epoxy resin settle after the pour, then pop any bubbles or create lacing and wave effects using a heat gun or propane torch. For realistic ocean foam, spray acetone or denatured alcohol to recreate the effect and manipulate the surface.  For marble effects, pour colors in organic streams, draw veining lines with a spreader or a gloved finger, and let the viscosity do the work of keeping patterns from over-blending.

TOTALBOAT WAVE + MARBLE ART EPOXY RESIN DETAILS

• High-viscosity formula (3,500 cps mixed) supports wave crests, marbling, and lacing effects
• Cures crystal clear to a high-gloss, glass-like finish
• Non-yellowing and scratch-resistant for long-term indoor use
• For outdoor use, topcoat with a spar varnish or polyurethane finish with UV resistance
• Shore D hardness of 82 for excellent durability on counters, bar tops, and other high-traffic applications
• Simple 1:1 mix ratio by volume
• Pour up to 1/4" for coatings and up to 1" in small molds
• Ready to recoat in 4-8 hours without sanding
• Compatible with alcohol inks, mica powder, and pigment dispersions
• Apply at 70-80°F in a well-ventilated area with appropriate PPE
• BPA-free, no-VOC formula for safer use and limited contact with food
• Sold as 1-gallon kit or 2-gallon kit