QuickEpox Clear 5-Minute Epoxy Glue

Pre-Order Now for a November Ship Date!

5-MINUTE CLEAR EPOXY GLUE FOR FAST REPAIRS

QuickEpox Clear gives you a strong epoxy bond without a long wait for household fixes, marine gear, workshop repairs, and DIY projects. It's ideal for reattaching loose hardware, mending broken parts, and filling small cracks or gaps. The formula sets in 5 minutes and cures in 1 hour for light use, so you can get items back into service sooner. Allow 24 hours for full cure.

CLEAR, STRONG BONDS ACROSS MOST MATERIALS

Use QuickEpox Clear to bond wood, metal, fiberglass, glass, ceramic, tile, rubber, fabric and most plastics. The gap-filling formula bridges small voids and uneven surfaces where ordinary glue may not make enough contact. It cures crystal clear, resists yellowing and won’t shrink, so repairs stay less noticeable. Once fully cured, the bond is waterproof and can be sanded, shaped, drilled or painted.

Note: QuickEpox does not bond to polyethylene or polypropylene.

EASY MIXING WITH LESS WASTE

The dual syringe dispenses resin and hardener at a precise 1:1 ratio to remove any guesswork. Point the syringe upward and let trapped air rise before removing the cap, then dispense equal amounts and mix thoroughly with the included stick. Apply between 50–90°F and secure the bonded parts for up to 10 additional minutes as needed.

Have leftover epoxy after your repair? Pull the plunger back slightly to stop the flow, wipe the tips clean and replace the cap to save it for the next project. Clean uncured epoxy with denatured alcohol. Cured material must be removed mechanically.

TOTALBOAT QUICKEPOX CLEAR 5-MINUTE EPOXY ADHESIVE FEATURES

• Fast-setting, two-part epoxy glue with a 1:1 mix ratio
• Sets in 5 minutes and cures in 1 hour for light use; allow 24 hours for full cure
• Bonds wood, metal, fiberglass, glass, ceramic, tile, rubber, fabric and most plastics
• Does not bond to polyethylene or polypropylene
• Gap-filling formula bridges small voids, cracks and uneven surfaces
• Cures crystal clear without yellowing or shrinking
• Waterproof after full cure and resistant to solvents and impacts
• Can be sanded, shaped, drilled or painted after curing
• Apply between 50–90°F
• Dual syringe keeps resin and hardener separate until ready to mix
• Accurately dispenses at a 1:1 mix ratio
• Includes a mixing stick for thoroughly combining both components
• Resealable cap helps prevent leaks and store leftover epoxy