ACCURATE, RELIABLE RESULTS
Calibrated to a precise 2A:1B mix ratio by volume.FOR SELECT TOTALBOAT EPOXIES
Use with High Performance Epoxy & Penetrating EpoxyEASY TO SET-UP AND USE
Trim tubes and dispense equal pumps of resin and hardenerREUSABLE AND EASY TO CLEAN
Store with pumps on bottles or clean with acetone to reuse2:1 Epoxy Pumps
2:1 Epoxy Pumps
ACCURATE, RELIABLE RESULTS
Calibrated to a precise 2A:1B mix ratio by volume.FOR SELECT TOTALBOAT EPOXIES
Use with High Performance Epoxy & Penetrating EpoxyEASY TO SET-UP AND USE
Trim tubes and dispense equal pumps of resin and hardenerREUSABLE AND EASY TO CLEAN
Store with pumps on bottles or clean with acetone to reuseCouldn't load pickup availability

TAKE THE GUESSWORK OUT FOR A PERFECT CURE
When working with large volumes or on critical projects, it can be stressful to ensure your batch of High Performance or Penetrating epoxy has the right ratio. Make your projects easier with these calibrated pumps. They dispense the exact amount needed of resin and hardener for a perfect mix ratio with every pump.
Set up is a breeze - start with the included instructions and template to determine the tube length needed for your kit size. Attach the non-stickered pump to your resin container and the black stickered pump to your hardener container, then prime until you get a steady stream of liquid. Once primed, press each pump once for 20cc of resin and 10cc of hardener to get the perfect mix ratio by volume. No messes, no guesses - just reliable cures and finishing projects faster.
TOTALBOAT 2:1 EPOXY METERING PUMPS DETAILS
- Pumps are calibrated to dispense an exact 2:1 ratio automatically
- Choose from High Performance pumps and Penetrating pumps for matching instructions and pump cutting template
- Use the nonstickered pump head for resin and black stickered pump for hardeneR
- Simply trim the pump tube, remove caps on containers to add respective pumps, and prime before dispensing
- When a container is empty, you can transfer and reuse its pump in a new container of the same product
- Clean with acetone or denatured alcohol as needed
COMPATIBILITY GUIDELINES
- Use with TotalBoat High Performance epoxy resin and all hardener speeds (Slow, Medium, Fast)
- Use with TotalBoat Penetrating Epoxy Sealer resin and hardener (Regular and Cold Weather formulas)
- Not compatible with 1.5 Pint kits - use these pumps with 1.5 Quart kits and larger
- Not compatible with TotalBoat Fathom deep pour epoxy resin
- Not compatible with other 2:1 epoxy brands
FREQUENTLY BOUGHT TOGETHER
YOU MAY ALSO LIKE
FREQUENTLY ASKED QUESTIONS
-
Which epoxy system do these pumps fit?
TotalBoat 2:1 Epoxy Pumps are designed for use with TotalBoat 2:1 High-Performance Epoxy Resin/Hardener and TotalBoat Penetrating Epoxy Resin/Hardener. Do not use these pumps with any other epoxy resin system, as they are not compatible. -
How many pumps of resin and hardener do I need?
Pumps are designed to automatically dispense the appropriate 2:1 mix ratio, so you only need to dispense one pump of resin to one pump of hardener. Do not use two pumps of resin to one pump hardener; doing so will result in the wrong ratio and improper cure. -
Which pump goes on the resin and which pump goes on the hardener?
The pump with the white pump head is for TotalBoat 2:1 epoxy resins and the pump with the white pump head/black 2:1 dot is for TotalBoat 2:1 epoxy hardeners. Do not use these pumps with TotalBoat ThickSet Fathom Epoxy. -
Are pumps reusable?
Yes, if properly cleaned and stored, pumps can be reused. -
Do these epoxy pumps need to be trimmed to fit smaller containers?
Yes. The initial length is to be used with gallon containers only. Pumps include detailed instructions for trimming to fit smaller size A containers. -
Do pumps need to be primed before use?
Yes. Prime the pumps by pushing down and releasing the head of each pump several times until you get a steady stream of liquid without any air pockets. -
How do I use these epoxy pumps?
After the initial setup and priming of the pumps, dispense the resin and hardener into a clean container. For every one full pump of resin, dispense one full pump of hardener. Mix for 2-3 minutes while scraping the sides to blend completely. For step-by-step instructions refer to our datasheets for Penetrating Epoxy and High-Performance Epoxy. -
How do you clean the pumps?
To clean pumps, flush with hot water, followed with a solvent, lacquer thinner, acetone, or denatured alcohol. -
Can you leave the pumps attached to resin and hardener containers, or do you need to remove them after every use?
You can leave the pumps attached to the containers while in storage. Store the resin and hardener in a dry location at room temperature. After a while, pumps may need to be re-primed. -
Will leaving the pumps on the containers cause epoxy to go bad?
No, it shouldn’t. The pumps keep the containers air-tight, but you may have to follow the priming procedure again if it is not used for a while. -
Do these pumps fit the size A quart containers?
Yes, but the pumps must be trimmed by 3-7/8″ to fit properly.