Milled Glass Fiber
Milled Glass Fiber
Couldn't load pickup availability
Milled glass fiber is commonly used when epoxy must fill a void, provide high strength, and offer resistance to cracking. Examples include structural filleting, bonding hardware, and keel bedding. TotalBoat fillers can be used with either epoxy or polyester resins to change the resin properties for various uses, such as bulking out the resin or making it easy to sand. Because fillers can affect the pot life of a resin, create a small trial batch first to determine how much working time you’ll have.
Milled Glass Fiber Details
- Finely ground, short fiberglass filaments are ideal for creating fine fillets and filling gaps.
- Increases dimensional stability and impact strength while minimizing shrinkage and distortion.
- Wear proper safety protection when blending Milled Glass Fiber and other fillers into mixed resin/hardener.
- Can be used alone or blended with TotalBoat Silica Thickener (sold separately) to prevent sagging on vertical and overhead surfaces.
- Product Color: White
- Cured Color: Off-white
- Sizes: Available in 1-Quart and 5-Quart sizes
FREQUENTLY BOUGHT TOGETHER
5:1 Traditional Epoxy Resin Kits
Clear High Performance Epoxy Kits
-
Milled Glass Fiber
- Fairing:
- Filleting:
- Filling:
- Bonding:
- Strengthening:
- Sanding:
- Vertical surfaces:
- Extending:
- Reducing shrinkage:
- Reducing weight:
- Surfboard or sailboard repair:
- THIS ITEM
-
Milled Glass Fiber
- Fairing: No
- Filleting: Yes
- Filling: Yes
- Bonding: Yes
- Strengthening: Yes
- Sanding: No
- Vertical surfaces: Yes (in thick enough concentration)
- Extending: No
- Reducing shrinkage: Yes
- Reducing weight: No
- Surfboard or sailboard repair: No
-
Silica Thickener
- Yes (blended with Glass Microballoons)
- Yes (blended with Glass Microballoons)
- Yes
- Yes
- Yes
- No
- Yes
- No
- No
- No
- No
-
Glass Microballoons
- Yes
- Yes
- No
- No
- No
- Yes
- No
- Yes
- Yes
- Yes
- Yes
YOU MAY ALSO LIKE
FREQUENTLY ASKED QUESTIONS
-
What are Milled Glass Fibers used with epoxy for?
Milled glass fibers are used in epoxy systems to increase tensile strength and flexibility, and it’s formulated to help reduce shrinkage. It’s ideal for use in situations where you must fill a void because it’s very high strength and provides resistance to cracking. Examples include structural filleting, bonding hardware, and keel bedding. -
Which epoxy system should you use with Milled Fibers?
You can use both 2:1 and 5:1 epoxy resin systems with Milled Fibers. -
Can you mix Milled Glass Fibers with other fillers?
Yes, you can blend Milled Glass Fiber and other fillers into a mixed resin/hardener. -
Why would you combine Milled Fibers with Silica Thickener?
Combining milled fibers with Silica Thickener will strengthen the resin to prevent sagging and draining on vertical and overhead surfaces. -
Can you use Milled Fibers with polyester or vinyl ester resin?
Milled Glass Fibers are chemical-resistant, so they are often used with both polyester and vinyl ester resin in putty form for deep blister repair on boats. -
How much should you add to epoxy?
Add 5% of Milled Glass Fibers by weight to the epoxy after it has been catalyzed to increase the tensile strength without negatively affecting pourability.