Wax Additive

Wax Additive


Liquid paraffin and styrene wax additive used for curing the final gelcoat layer or final layer of polyester laminating resin and fiberglass in layup applications. Available in a 4 oz. bottle.

SKU: N/A Category:


Wax additive is added to the final layer of gelcoat (without wax) or to the polyester laminating resin (without wax) on the final layer of a wet layup to produce a tack-free surface, and allow the material to cure to a hard finish. When you’re building up the layers in a wet layup application, you don’t want wax in the polyester resin because you want the layers to bond chemically, resulting in a stronger bond. It’s only the final layer that needs wax additive in order to cure. The wax creates an air barrier so the resin can cure to a tack-free state ready for sanding and finishing.

  • Color: Clear
  • Bottle sizes: 4 oz.

Directions for Using Wax Additive

This additive contains paraffin and styrene. When adding it to gelcoat, you must also add the MEKP (methyl ethyl ketone peroxide) hardener.

The chart below indicates how much additive to add to wax-free gelcoat or polyester resin. Avoid using too much wax as it will result in fish eye and other undesirable results.

Amount of Gelcoat or Polyester Resin w/o Wax Quantity of Wax Additive Required
1 ounce 20 drops
16 oz. (1 pint) 1/4 ounce
32 oz. (1 quart) 1/2 ounce to 1 ounce
1 gallon 4 ounces

Important Note

In temperatures below 70°F, the paraffin component can solidify in the container. To return it to its liquid state, place the container in the sun or in front of a lamp. PLEASE USE CAUTION—WAX ADDITIVE IS FLAMMABLE!

Fiberlay Surface Seal Wax Additive Technical Data

Surface Seal Wax Additive SDS

You may also like…